Factors that influence value creation and value capture in companies – evidence in an emerging market
Keywords:
Technological innovation, Innovation, Creativity, Business models, Value creation in companies, Value capture in companiesAbstract
PurposeThe objective of this study is to analyze the influence of the following variables – technological innovation, creativity and innovation management and business model innovation – on two variables: value creation in companies and value capture in companies.
Design/methodology/approachThe sample consisted of 222 informants employed by companies listed in the Top 1,000 in the city of Lima. A questionnaire was designed to examine the five variables under study (three independent variables and two dependent variables). Confirmatory and structural factor analyses were performed using structural equations with the SPSS AMOS software.
FindingsThe study shows that value capture is influenced by technological innovation, creativity and innovation management, as well as business model innovation, while value creation is influenced only by technological innovation and business model innovation.
Research limitations/implicationsOne limitation of this study is that its results are generalized for companies from different business sectors, so its conclusions cannot be associated with specific business sectors. Another limitation of the study is that the data from this research are cross-sectional, so the relationships found between the study variables are not sufficient to establish a definitive causal relationship.
Practical implicationsFor executives, this study offers valuable insights into the significance of their management roles in driving innovation, particularly concerning the dual objectives of value creation and capture within their organizations.
Originality/valueA research model is proposed to identify the factors that influence value creation and value capture in companies in a developing country, where consumers have different purchasing power and purchasing preferences compared to consumers in developed countries. Executives focus their efforts on creating and implementing innovative ideas only if they perceive that doing so will achieve monetary results, and it is necessary to emphasize the innovation of internal processes to create value in a way customers will perceive.
Downloads
References
Abrahamsson, J., Boter, H. and Vanyushyn, V. (2019), “Business model innovation of international new ventures: an empirical study in a Swedish context”, Journal of International Entrepreneurship, Vol. 17 No. 1, pp. 75-102, doi: https://doi.org/10.1007/s10843-018-0238-3.
Agustia, D., Sawarjuwono, T. and Dianawati, W. (2019), “The mediating effect of environmental management accounting on green innovation - firm value relationship”, International Journal of Energy Economics and Policy, Vol. 9 No. 2, pp. 299-326, doi: https://doi.org/10.32479/ijeep.7438.
Amit, R. and Han, X. (2017), “Value creation through novel resource configurations in a digitally enabled world”, Strategic Entrepreneurship Journal, Vol. 11 No. 3, pp. 228-242, doi: https://doi.org/10.1002/sej.1256.
Bajaba, S., Tahlil Azim, M. and Aftab Uddin, M. (2022), “Social support and employee turnover intention: the mediating role of work-family conflict”, Revista Brasileira de Gestão de Negócios, Vol. 24 No. 1, pp. 48-65, doi: https://doi.org/10.7819/rbgn.v24i1.4153.
Bel, R. (2010), “Leadership and innovation: learning from the best”, Global Business and Organizational Excellence, Vol. 29 No. 2, pp. 47-60, doi: https://doi.org/10.1002/joe.20308.
Bilton, C. and Cummings, S. (2010), “Creative strategy: reconnecting business and innovation”, in Creative Strategy, Wiley, Hoboken, NJ.
Binuyo, A., Ekpe, H. and Binuyo, B. (2019), “Innovative strategies and firm growth: evidence from selected fast moving consumer goods firms in Lagos state, Nigeria”, Problems and Perspectives in Management, Vol. 17 No. 2, pp. 313-322, doi: https://doi.org/10.21511/ppm.17(2).2019.24.
Bocken, N.M.P., Short, N.M.P., Rana, P. and Evans, S. (2014), “A literature and practice review to develop sustainable business model archetypes”, Journal of Cleaner Production, Vol. 65, pp. 42-56, doi: https://doi.org/10.1016/j.jclepro.2013.11.039.
Bouncken, R., Fredrich, V. and Kraus, S. (2020), “Configurations of firm-level value capture incoopetition”, Long Range Planning, Vol. 53 No. 1, pp. 869-883, doi: https://doi.org/10.1016/j.lrp.2019.02.002.
Camisón-Haba, S., Clemente-Almendros, J. and Gonzales-Cruz, T. (2019), “How technology-based firms become also highly innovative firms? The role of knowledge, technological and managerial capabilities, and entrepreneurs' background”, Journal of Innovation and Knowledge, Vol. 4 No. 3, pp. 162-170, doi: https://doi.org/10.1016/j.jik.2018.12.001.
Cao, L., Navare, J. and Jin, Z. (2018), “Business model innovation: how the international retailers rebuild their core business logic in a new host country”, International Business Review, Vol. 27 No. 3, pp. 543-562, doi: https://doi.org/10.1016/j.ibusrev.2017.10.005.
Casadesus-Masanell, R. and Ricart, J.E. (2010), “From strategy to business models and onto tactics”, Long Range Planning, Vol. 43 Nos 2-3, pp. 195-215, doi: https://doi.org/10.1016/j.lrp.2010.01.004.
Cheung, F., Kurul, E. and Oti, A. (2016), “A case study of hybrid strategies to create value for a contracting business in the education sector in England and Wales”, Construction Management and Economics, Vol. 34 Nos 4-5, pp. 335-352, doi: https://doi.org/10.1080/01446193.2016.1200107.
Claver-Cortés, E., Pertusa-Ortega, E. and Molina-Azorín, J. (2012), “Characteristics of organizational structure relating to hybrid competitive strategy: implications for performance”, Journal of Business Research, Vol. 65 No. 7, pp. 993-1002, doi: https://doi.org/10.1016/j.jbusres.2011.04.012.
Cucculelli, M. and Bettinelli, C. (2015), “Business models, intangibles and firm performance: evidence on corporate entrepreneurship from Italian manufacturing SMEs”, Small Business Economics, Vol. 45 No. 2, pp. 329-350, doi: https://doi.org/10.1007/s11187-015-9631-7.
Damanpour, F. and Evan, W.M. (1984), “Organizational innovation and performance: the problem of organizational lag”, Administrative Science Quarterly, Vol. 29 No. 3, pp. 392-402, doi: https://doi.org/10.2307/2393031.
Damanpour, F., Sanchez-Henriquez, F. and Chiu, H. (2018), “Internal and external sources and the adoption of innovations in organizations”, British Journal of Management, Vol. 19 No. 4, pp. 1-19, doi: https://doi.org/10.1111/14678551.12296.
Del Brio, J. and Lizarzaburu, E. (2018), “CSR actions in companies and perception of their reputation by managers: analysis in the rural area of an emerging country in the banking sector”, Sustainability, Vol. 10 No. 4, p. 920, doi: https://doi.org/10.3390/su10040920.
Dereli, D. (2015), “Innovation management in global competition and competitive advantage”, Procedia - Social and Behavioral Sciences, Vol. 195, pp. 1365-1370, doi: https://doi.org/10.1016/j.sbspro.2015.06.323.
Distanont, A. and Khongmalai, O. (2018), “The role of innovation in creating a competitive advantage”, Kasetsart Journal of Social Sciences, Vol. 41 No. 1, pp. 1-7, doi: https://doi.org/10.1016/j.kjss.2018.07.009.
Dyduch, W., Chudziński, P., Cyfert, S. and Zastempowski, M. (2021), “Dynamic capabilities, value creation and value capture: evidence from SMEs under Covid-19 lockdown in Poland”, PLoS One, Vol. 16 No. 6, pp. 1-28, doi: https://doi.org/10.1371/journal.pone.0252423.
Ferreira, J., Fernandes, C. and Ferreira, F. (2020), “Wearing failure as a path to innovation”, Journal of Business Research, Vol. 120, pp. 195-202, doi: https://doi.org/10.1016/j.jbusres.2020.08.006.
Foss, N. and Saebi, T. (2017), “Fifteen years of research on business model innovation: how far have we come, and where should we go?”, Journal of Management, Vol. 43 No. 1, pp. 200-227, doi: https://doi.org/10.1177/0149206316675927.
Fossas-Olalla, M., Minguela-Rata, B., López-Sánchez, J. and Fernandez-Menendez, J. (2015), “Product innovation: when should suppliers begin to collaborate?”, Journal of Business Research, Vol. 68 No. 7, pp. 1404-1406, doi: https://doi.org/10.1016/j.jbusres.2015.01.022.
Gandia, R. and Parmentier, G. (2017), “Optimizing value creation and value capture with a digital multi sided business model”, Strategic Change, Vol. 26 No. 4, pp. 323-331, doi: https://doi.org/10.1002/jsc.2134.
Geissdoerfer, M., Vladimirova, D. and Evans, S. (2018), “Sustainable business model innovation: a review”, Journal of Cleaner Production, Vol. 198, pp. 401-416, doi: https://doi.org/10.1016/j.jclepro.2018.06.240.
George, G., Mcgahan, A. and Prabhu, J. (2012), “Innovation for inclusive growth: towards a theoretical framework and a research agenda”, Journal of Management Studies, Vol. 49 No. 4, pp. 661-683, doi: https://doi.org/10.1111/j.1467-6486.2012.01048.x.
Hair, J., Anderson, R., Tathan, R. and Black, W. (1999), Análisis Multivariante, (5th edición) , Pearson, Prentice Hall, Mexico, available at: https://www.amazon.com/-/es/Joseph-Hair/dp/8483220350.
Heij, C.V., Volberda, H., Van Den Bosch, F.A. and Hollen, R.M. (2019), “How to leverage the impact of R and D on product innovation? The moderating effect of management innovation”, R and D Management, Vol. 50 No. 2, pp. 277-294, doi: https://doi.org/10.1111/radm.12396.
Hossain, M. (2021), “Frugal innovation and sustainable business models”, Technology in Society, Vol. 64, pp. 508-515, doi: https://doi.org/10.1016/j.techsoc.2020.101508.
Iheanachor, N., David-West, Y. and Ovemeso Umukoro, I. (2021), “Business model innovation at the bottom of the pyramid – a case of mobile money agents”, Journal of Business Research, Vol. 127, pp. 96-107, doi: https://doi.org/10.1016/j.jbusres.2021.01.029.
Illmeyer, M., Grosch, D., Kittler, M. and Priess, P. (2017), “The impact of financial management on innovation”, Entrepreneurship and Sustainability Issues, Vol. 5 No. 1, pp. 58-71, doi: https://doi.org/10.9770/jesi.2017.5.1(5.
Klarner, P., Probst, G. and Useem, M. (2020), “Opening the black box: unpacking board involvement in innovation”, Strategic Organization, Vol. 18 No. 4, pp. 487-519, doi: https://doi.org/10.1177/1476127019839321.
Krajcsák, Z. (2019), “Implementing open innovation using quality management systems: the role of organizational commitment and customer loyalty”, Journal of Open Innovation: Technology, Market, and Complexity, Vol. 5 No. 4, pp. 90-100, doi: https://doi.org/10.3390/joitmc5040090.
Kusterer, D. and Schmitz, P. (2017), “The management of innovation: experimental evidence”, Games and Economic Behavior, Vol. 104, pp. 706-725, doi: https://doi.org/10.1016/j.geb.2017.06.011.
Lee, J.W. and Xuan, Y. (2019), “Effects of technology and innovation management and total factor productivity on the economic growth”, The Journal of Asian Finance, Economics and Business, Vol. 6 No. 2, pp. 63-73, doi: https://doi.org/10.13106/jafeb.2019.vol6.no2.63.
Lim, C. and Fujimoto, T. (2019), “Frugal innovation and design changes expanding the cost-performance Frontier: a Schumpeterian approach”, Research Policy, Vol. 48 No. 4, pp. 1016-1029, doi: https://doi.org/10.1016/j.respol.2018.10.014.
Lynch, P., Power, J., Hickey, R. and Messervey, T. (2016), “Business model strategies: flexibility trade in low voltage distribution networks”, Entrepreneurship and Sustainability Issues, Vol. 4 No. 3, pp. 380-391, doi: https://doi.org/10.9770/jesi.2017.4.3s(12.
Macharia Chege, S. and Wang, D. (2020), “The influence of technology innovation on SME performance through environmental sustainability practices in Kenya”, Technology in Society, Vol. 60, pp. 210-222, doi: https://doi.org/10.1016/j.techsoc.2019.101210.
Machová, R., Huszárik, E. and Šimonová, M. (2016), “Selected aspects of innovation policy for small and medium sized enterprises”, Journal of International Studies, Vol. 9 No. 2, pp. 219-232, doi: https://doi.org/10.14254/2071-8330.2016/9-2/17.
Maucuer, R., Renaud, A., Ronteau, S. and Muzellec, L. (2022), “What can we learn from marketers? A bibliometric analysis of the marketing literature on business model research”, Long Range Planning, Vol. 55 No. 5, 102219, doi: https://doi.org/10.1016/j.lrp.2022.102219.
Melendez, K., Dávila, A. and Melgar, A. (2019), “Literature review of the measurement in the innovation management”, Journal of Technology Management and Innovation, Vol. 14 No. 2, pp. 81-87, doi: https://doi.org/10.4067/S0718-27242019000200081.
Miroshnychenkoa, I., Stroblb, A., Matzlerc, K. and De Massis, A. (2021), “Absorptive capacity, strategic flexibility, and business model innovation: empirical evidence from Italian SMEs”, Journal of Business Research, Vol. 130, pp. 670-682, doi: https://doi.org/10.1016/j.jbusres.2020.02.015.
Montoya, M.F., Ostos, J. and Saenz Arteaga, A. (2020), “Role of empowerment and Identification with work teams in innovation climate”, Revista de Administracao de Empresas, Vol. 60 No. 3, pp. 183-194, doi: https://doi.org/10.1590/s0034-759020200302.
Müller, J., Buliga, O. and Voigt, K.-I. (2018), “Fortune favors the prepared: how SMEs approach business model innovations in Industry 4.0”, Technological Forecasting and Social Change, Vol. 132, pp. 2-17, doi: https://doi.org/10.1016/j.techfore.2017.12.019.
Mutlu, C.C., Zhan, W., Peng, M.W. and Lin, Z.J. (2015), “Competing in (and out of) transition economies”, Asian Pacific Journal of Management, Vol. 32 No. 3, pp. 571-596, doi: https://doi.org/10.1007/s10490-015-9419-y.
Nasiri, A., Alleyne, A. and Yihui, L. (2016), “Analysis of innovation management in German enterprises”, Cogent Business and Management, Vol. 3 No. 1, pp. 727-741, doi: https://doi.org/10.1080/23311975.2016.1216727.
Olmedo-Cifuentes, I. and Martinez-León, I. (2014), “Influence of management style on employee views of corporate reputation. Application to audit firms”, Business Research Quarterly, Vol. 17 No. 4, pp. 223-241, doi: https://doi.org/10.1016/j.brq.2013.08.001.
Omar, Y., Minoufekr, M. and Plapper, P. (2019), “Business analytics in manufacturing: current trends, challenges and pathway to market leadership”, Operations Research Perspectives, Vol. 6, pp. 127-142, doi: https://doi.org/10.1016/j.orp.2019.100127.
Ostos, J., Saenz, A. and Bremser, K. (2019), “Relationships of business strategies and organizational characteristics with innovation types: application in service companies”, Revista Perspectiva Empresarial, Vol. 6 No. 2, pp. 5-19, doi: https://doi.org/10.16967/23898186.595.
Pedron, C., Picoto, W., Colaco, M. and Araújo, C. (2018), “CRM system: the role of dynamic capabilities in creating innovation capability”, Brazilian Business Review, Vol. 15 No. 5, pp. 494-511, doi: https://doi.org/10.15728/bbr.2018.15.5.6.
Peterková, J. and Franek, J. (2018), “Specifics of management of enterprise innovation activities in the Czech republic - the decision-making mechanism”, Management Systems in Production Engineering, Vol. 16 No. 3, pp. 137-142, doi: https://doi.org/10.1515/mspe-2018-0022.
Placer-Maruri, E., Pérez-González, D. and Soto-Acosta, P. (2016), “Effects of the use of competitive intelligence in industrial SMEs”, Intangible Capital, Vol. 12 No. 4, pp. 923-941, doi: https://doi.org/10.3926/ic.750.
Plotnikova, L. and Romanenko, M. (2019), “Creative methods of innovation process management as the law of competitiveness”, Management Science Letters, Vol. 9, pp. 737-748, doi: https://doi.org/10.5267/j.msl.2019.1.015.
Rajapathirana, R.P.J. and Hui, Y. (2018), “Relationship between innovation capability, innovation type, and firm performance”, Journal of Innovation and Knowledge, Vol. 3 No. 1, pp. 44-55, doi: https://doi.org/10.1016/j.jik.2017.06.002.
Rajiani, I. and Ismail, N. (2019), “Management innovation in balancing technology innovation to harness universities performance in the era of community 4.0”, Polish Journal of Management Studies, Vol. 19 No. 1, pp. 309-321, doi: https://doi.org/10.17512/pjms.2019.19.1.24.
Ruggieri, R., Savastano, M., Scalingi, A., Bala, D. and D'Ascenzo, F. (2018), “The impact of digital platforms on business models: an empirical investigation on innovative start-ups”, Management and Marketing. Challenges for the Knowledge Society, Vol. 13 No. 4, pp. 1210-1225, doi: https://doi.org/10.2478/mmcks-2018-0032.
Salimi, N. and Rezaei, J. (2018), “Evaluating firms' R and D performance using best worst method”, Evaluation and Program Planning, Vol. 66, pp. 147-155, doi: https://doi.org/10.1016/j.evalprogplan.2017.10.002.
Smith, C., Fixson, S., Paniagua-Ferrari, C. and Parise, S. (2017), “The evolution of an innovation capability”, Research-Technology Management, Vol. 60 No. 2, pp. 26-35, doi: https://doi.org/10.1080/08956308.2017.1276388.
Spieth, P., Laudien, S. and Meissner, S. (2020), “Business model innovation in strategic alliances: a multi layer perspective”, R and D Management, Vol. 51 No. 1, pp. 24-39, doi: https://doi.org/10.1111/radm.12410.
Stevanović, M., Marjanović, D. and Štorga, M. (2016), “Idea management in product innovation – the empirical research results”, Tehnički Vjesnik, Vol. 23 No. 5, pp. 1285-1294, doi: https://doi.org/10.17559/TV-20150603223629.
Stoycheva, B. and Antonova, D. (2018), “Investigating factor interactions in formalising the process of developing new products”, Serbian Journal of Management, Vol. 13 No. 1, pp. 173-184, doi: https://doi.org/10.5937/sjm13-16409.
Stuhlfaut, M. and Windels, K. (2012), “Measuring the organisational impact on creativity”, International Journal of Advertising, Vol. 31 No. 4, pp. 795-818, doi: https://doi.org/10.2501/IJA-31-4-795-818.
Suominen, A., Seppänen, M. and Dedehayir, O. (2019), “A bibliometric review on innovation systems and ecosystems: a research agenda”, European Journal of Innovation Management, Vol. 22 No. 2, pp. 335-360, doi: https://doi.org/10.1108/EJIM-12-2017-0188.
Tamulevičienė, D. and Androniceanu, A. (2020), “Selection of the indicators to measure an enterprise's value and its changes in the controlling system for medium-sized enterprises”, Entrepreneurship and Sustainability Issues, Vol. 7 No. 3, pp. 1440-1458, doi: https://doi.org/10.9770/jesi.2020.7.3.
Tou, Y., Watanabe, C. and Neittaanmäki, P. (2020), “Fusion of technology management and financing management - amazon's transformative endeavor by orchestrating techno-financing systems”, Technology in Society, Vol. 60, pp. 219-239, doi: https://doi.org/10.1016/j.techsoc.2019.101219.
Ubeda, C.L., Santos, F.C. and Nagano, M.S. (2017), “Analysis of the individual competences contributions to innovation management based on methodological triangulation”, Gestão and Produção, Vol. 24 No. 3, pp. 595-609, doi: https://doi.org/10.1590/0104-530X1481-16.
Velu, C. (2015), “Business model innovation and third-party alliance on the survival of new firms”, Technovation, Vol. 35, pp. 1-11, doi: https://doi.org/10.1016/j.technovation.2014.09.007.
Vedovoto, G. and Prior, D. (2015), “Opciones reales: una propuesta para valorar proyectos de I+D en centros públicos de investigación agraria”, Contaduría y Administración, Vol. 60 No. 1, pp. 145-179, doi: https://doi.org/10.1016/s0186-1042(15)72150-9, available at: https://www.scielo.org.mx/scielo.php?script=sci_arttext&id=S0186-10422015000100007.
Voig, C., Hofer, M. and Schön, S. (2018), “Innovation management in schools: barriers and enablers to making as educative practice”, available at: https://www.semanticscholar.org/paper/Innovation-management-in-schools%3A-Barriers-and-to-Voigt-Hofer/a954c31061cc28d51ec194312c33ee2971daf24e.
Von Delft, S., Kortmann, S., Gelhard, C. and Pisani, N. (2019), “Leveraging global sources of knowledge for business model innovation”, Long Range Planning, Vol. 52 No. 5, pp. 848-868, doi: https://doi.org/10.1016/j.lrp.2018.08.003.
Weijs-Perrée, M., Appel-Meulenbroek, R. and Arentzea, T. (2020), “Analysing knowledge sharing behaviour in business centres: a mixed multinomial logit model”, Knowledge Management Research and Practice, Vol. 18 No. 3, pp. 323-335, doi: https://doi.org/10.1080/14778238.2019.1664269.
Yang, D., Wei, Z., Shi, H. and Zhao, J. (2020), “Market orientation, strategic flexibility and business model innovation”, Journal of Business and Industrial Marketing, Vol. 35 No. 4, pp. 771-784, doi: https://doi.org/10.1108/JBIM-12-2018-0372.
Zajkowska, M. (2017), “Open models of innovation processes as a future management challenge for small and medium-sized enterprises in Poland”, Journal of Management and Business Administration. Central Europe, Vol. 25 No. 4, pp. 193-208, doi: https://doi.org/10.7206/jmba.ce.2450-7814.214.
Zhang, Y., Khan, U., Lee, S. and Salik, M. (2019), “The influence of management innovation and technological innovation on organization performance. A mediating role of sustainability”, Sustainability, Vol. 11 No. 2, p. 495, doi: https://doi.org/10.3390/su11020495
